|
|
Spring driven drum for automatic rewind 100 foot air hose reel. Non-snag roller reduces
hose wear. Latching mode switch allows choice of free run or
latching mode. Multi-position release ratchet, spring fully enclosed
and lubricated. Positive latching mechanism automatically locks hose
at desired length. Durable, impact resistant, polypropylene
construction. The 100 foot air hose reel is a feature packed, auto rewind,
enclosed air hose reel. Made of quality UV stabilized polypropylene:
Lightweight and corrosion resistant. Latching mode switch: Two
position switch allows users to choose between free-run or latching
mode (latches in 2 foot increments) 100 foot air hose reel Rewind mechanism: Factory preset
tension; adjustable in the field. Mounting bracket included: Reel
may be mounted on wall of ceiling. Hose stopper keeps end of hose
accessible
Ideal for connecting machines to air/water supply. Also designed for
hand pull operations, with or without ratchet stop.
1/4, 3/8, or 1/2(6, 9, 13mm) hose
All welded solid steel construction
Fully automatic; Machine mountable
Heavy duty mounting bracket
Safetychangeฎ spring motor
Weatherproof gasket on spring motor
Positive ratchet lock with disengage
Multi-position adjustable hose guide
Orange polyester baked-on finish
Also available without hose
Optional 340 degree pivot base
Optional adjustable hose stop
Ideal for fluids, compressed air.
Mount base up, down or to wall for vertical or horizontal hose
travel.
100 foot air hose reel are designed to make hose handling safer and
smoother and to minimize costly hose replacement caused by excessive
rewind speeds. Rewind pull is kept to a minimum. The result is a
reel that is gentle to pull out, yet very adequate to rewind the
hose. In some situations, the rewind pull provided by PULL reels
may require a gentle assist from the operator.
The PULL reel was designed to drag the hose across the floor,
but will not lift the hose weight vertically. Therefore, the reel
should be mounted a maximum of 3 ft (0.9m) above the floor so that
the hose may be pulled horizontally. 100 foot air hose reel may be mounted with base
up, down, or on a wall. A typical mounting is under a workbench or
other floor mounted equipment. This reel is not designed to be
mounted on a machine requiring automatic hose rewind.
As a full-line master distributor for equipment is this area's source for the world's finest air
compressors and air system accessories.
US
Equipment has two locations to service all your compressed air
needs.
Our sole purpose is to help you meet your current and anticipated
compressed air requirements effectively and efficiently. We can
engineer custom air systems, when necessary, or recommend standard
products from our comprehensive line of air
compressors, when these best meet your requirements.
And once your equipment is installed, we will see that it is
maintained and serviced properly. With an extensive parts inventory
on-hand, repair facilities second- to-none, and our staff of
knowledgeable and experienced service personnel, we're prepared to
meet your regular maintenance schedules and to provide emergency
service when you need it.
100 foot air hose reel
are designed for the extraction of car and truck exhaust gases
at the tailpipe which are emitted inside buildings. They are
designed for facilities such as vehicle service garages and vehicle
storage garages as well as hard to reach areas for many other types
of fumes and gases. A flexible hose mounted on the reel allows for
extraction of gas-air mixture with max. temperature 1150C (2000F).
The hose reel is made from steel components which are galvanized or
painted.
|
